Brick Painting & Limewashing · Trophy Club, TX
Trophy Club masonry, and the HOA that will want to see the color.
Two halves to a masonry job here: getting the color approved, and then coating the whole envelope in one visit rather than across several weeks.
Here is what brick painting & limewashing in Trophy Club actually involves.
The Highlands and the surrounding neighborhoods have architectural review, and a mineral coating does not come off — so approval genuinely has to come first. We prepare the packet with the proposed color, the sheen and the surfaces each applies to, submit it, and wait. Where a neighborhood keeps an approved palette we work from it, which usually shortens the process considerably when the color you want is already on it.
Then the envelope goes in one trip. On a two-story brick-and-stone elevation with a chimney chase, the lift is the expensive item to mobilize, so coating the masonry now and doing the iron and garage doors later means paying to bring equipment twice. The reason we use Romabio Mineral Masonry Paint rather than an ordinary masonry paint is failure mode: a film-forming paint seals the face of the brick and lifts when moisture gets behind it, where a mineral coating bonds in and stays vapor-open.
Here is what the price covers.
- Thorough cleaning of the masonry to remove all mold, dirt and debris first
- Romabio Mineral Masonry Paint, which lets the brick breathe naturally
- A finish that releases moisture from within while blocking moisture from outside
- Application by masonry brush, worked both horizontally and vertically into every seam
- Classico Limewash where a whitewashed or softened effect is the goal
- Resistance to mold, peeling and sun damage, backed by a 20-year product warranty
These are the questions we hear most about brick painting & limewashing in Trophy Club.
What if the HOA rejects our color?
We revise and resubmit. It is exactly why we submit before scheduling rather than after — a mineral coating is permanent and not something to apply speculatively.
Will coating the brick trap moisture?
Not with the mineral paint we use. It stays vapor-open, so the wall releases moisture from within while being protected from outside.
Do you have to clean brick prior to painting?
Yes, and it matters more than people expect. The surface must be thoroughly cleaned to remove all mold, dirt and debris — if it isn’t, the paint struggles to adhere, which compromises both the quality and the service life of the job. We do all of that preparation for you.
What is the best way to apply paint to brick?
We use a masonry brush, stroking both horizontally and vertically. That works the paint into all the small holes and seams in the brick surface rather than bridging over them.
How many coats of limewash do I need?
For a whitewash effect, a single coat of Classico Limewash. For a solid-colored finish it takes two to three coats before it becomes non-transparent and reads as a solid color.
Also in Trophy Club