Interior Painting · Frisco, TX
Correcting one thin coat of builder flat, across the whole house.
Almost every new Frisco house ships with a single thin coat of flat builder paint sprayed over unprimed drywall. It marks if you look at it, it cannot be washed, and it is the reason most of our Frisco interiors happen inside the first three years of ownership.
Here is what interior painting in Frisco actually involves.
Builder flat is thin by design — it is one sprayed coat, usually with no primer under it, which is why a scuff goes straight through to the paper and why wiping it burnishes a shiny patch. The fix is not another coat of flat. We prime any repairs and stained areas, then put two coats of a scrubbable matte over the whole envelope. In Panther Creek and The Trails that is the single most common job we do, and it is what turns a house that shows every fingerprint into one that survives children.
The second Frisco reality is the entry. Starwood, Newman Village and Phillips Creek Ranch houses commonly have an eighteen to twenty-two foot entry with an open stair run into it. That is scaffold work, and the open stair means the scaffold has to be built over protected treads. We do the whole envelope in one mobilization — including the entry and the upstairs landing — rather than doing the ground floor now and coming back for the high work, which is how it usually gets quoted and always costs more in the end.
Here is what the price covers.
- A fast, accurate and competitively priced written estimate before any work begins
- A meeting with our In-Home Color Consultant to settle colors and sheens
- Meticulous surface preparation — the part that decides how the finish ages
- Premium Sherwin-Williams or Benjamin Moore products throughout
- Clean job sites, respectful crews, and your home protected while we work
- A lifetime workmanship warranty on residential interior painting
Interior Painting in Frisco, in detail.
The parts of a interior painting job that people ask about separately.
These are the questions we hear most about interior painting in Frisco.
Should I wait until the house settles before painting?
One heating and cooling cycle is worth waiting for if you can — that is when nail pops and drywall seam cracks show up. We reset and repair them as part of the job, so painting after the first year means fixing them once rather than twice.
Can you match the builder color for touch-ups instead?
We can match it, but on builder flat a touch-up almost always flashes as a visible patch because the original coat is so thin and sheens never quite match. Wall-to-wall recoating gives a result you are not looking at forever.
What should I take into consideration when choosing a color?
Four things: any existing colors in the space (woodwork, carpet, furniture), the size of the space, the amount of light it gets — both natural and artificial — and the main purpose of the room. Our In-Home Color Consultation exists to work through exactly this.
How long will my interior paint job last?
Interior painting lasts longer than exterior because it isn’t exposed to as many harmful elements. Most would tell you to repaint every three to five years. We use high-quality Sherwin-Williams paint and back interior work with a lifetime warranty.
Do I need to be home while my house is being painted?
No — and in most situations we actually advise against it. On a whole-interior project we mask and cover every area first so we can work faster than room by room, which means furniture and appliances stay protected for the duration. Where it helps, we finish one bedroom on day one so you have somewhere to sleep. We use zero- or low-VOC paints for walls and ceilings, so staying is more feasible on a walls-only project than one involving cabinetry.
Also in Frisco