Brick Painting & Limewashing · Denton, TX
Old Denton brick needs a coating that breathes.
The brick around Denton’s historic square is old, soft and porous, and it is the least forgiving substrate for the wrong product. It is also the substrate a mineral coating suits best.
Here is what brick painting & limewashing in Denton actually involves.
Century-old brick was fired softer than modern brick and it moves moisture constantly. Seal the face of it with a film-forming paint and that moisture gets trapped against the masonry, which is how spalling starts — the face of the brick begins shedding. A vapor-open mineral coating avoids that mechanism entirely: it bonds into the surface, lets the wall release moisture from within, and still keeps weather out. On pre-war Denton brick that difference is not cosmetic, it is structural.
Out in the newer subdivisions south and west the question is aesthetic rather than technical. Rayzor Ranch and the surrounding developments were built with a lot of the same orange-red brick across whole streets, and limewash is the most effective way to change that without re-cladding. One coat of Classico Limewash gives a whitewashed effect that lets the brick read through; two to three coats take it to a solid color.
Here is what the price covers.
- Thorough cleaning of the masonry to remove all mold, dirt and debris first
- Romabio Mineral Masonry Paint, which lets the brick breathe naturally
- A finish that releases moisture from within while blocking moisture from outside
- Application by masonry brush, worked both horizontally and vertically into every seam
- Classico Limewash where a whitewashed or softened effect is the goal
- Resistance to mold, peeling and sun damage, backed by a 20-year product warranty
These are the questions we hear most about brick painting & limewashing in Denton.
Is it safe to coat the old brick near the square?
With a vapor-open mineral coating, yes — and it is safer than a film-forming paint, which traps moisture against soft old brick and can cause the face to spall.
How many coats of limewash will we need?
One coat of Classico Limewash for a whitewashed effect where the brick still shows through. Two to three coats if you want a solid, non-transparent color.
Do you have to clean brick prior to painting?
Yes, and it matters more than people expect. The surface must be thoroughly cleaned to remove all mold, dirt and debris — if it isn’t, the paint struggles to adhere, which compromises both the quality and the service life of the job. We do all of that preparation for you.
What is the best way to apply paint to brick?
We use a masonry brush, stroking both horizontally and vertically. That works the paint into all the small holes and seams in the brick surface rather than bridging over them.
How many coats of limewash do I need?
For a whitewash effect, a single coat of Classico Limewash. For a solid-colored finish it takes two to three coats before it becomes non-transparent and reads as a solid color.
Also in Denton