Brick Painting & Limewashing · Colleyville, TX
Softening stone-and-brick Colleyville elevations without sealing them.
A lot of Colleyville houses are brick or stone to the sill with stucco above, and the brick is usually the element that dates the elevation. A mineral coating changes it permanently without trapping moisture in the wall.
Here is what brick painting & limewashing in Colleyville actually involves.
The reason we use Romabio Mineral Masonry Paint rather than an ordinary masonry paint is what happens afterwards. A film-forming paint seals the face of the brick, so when moisture inevitably gets behind it the film lifts and you are into stripping. A mineral coating bonds into the masonry and stays vapor-open, which means the wall can release moisture from inside while still being protected from the outside. Romabio backs it for twenty years.
On these elevations the practical questions are scale and approval. Two-story stone and brick fronts with deep trim mean lift access planned before day one, and several Colleyville neighborhoods want to see the color before you commit to it. We check whether a submittal is needed at the walkthrough and handle that packet rather than starting and hoping — a permanent finish is not something to apply and then negotiate.
Here is what the price covers.
- Thorough cleaning of the masonry to remove all mold, dirt and debris first
- Romabio Mineral Masonry Paint, which lets the brick breathe naturally
- A finish that releases moisture from within while blocking moisture from outside
- Application by masonry brush, worked both horizontally and vertically into every seam
- Classico Limewash where a whitewashed or softened effect is the goal
- Resistance to mold, peeling and sun damage, backed by a 20-year product warranty
These are the questions we hear most about brick painting & limewashing in Colleyville.
Will painting the brick trap moisture in the wall?
Not with the mineral paint we use. It stays vapor-open, so the brick releases moisture from within while being protected from moisture outside. That is the specific reason we do not use a film-forming masonry paint on brick.
Does the HOA need to approve a brick color here?
In several Colleyville neighborhoods, yes. We establish that before quoting and prepare the submittal, because a mineral coating is a permanent change and not one to apply speculatively.
Do you have to clean brick prior to painting?
Yes, and it matters more than people expect. The surface must be thoroughly cleaned to remove all mold, dirt and debris — if it isn’t, the paint struggles to adhere, which compromises both the quality and the service life of the job. We do all of that preparation for you.
What is the best way to apply paint to brick?
We use a masonry brush, stroking both horizontally and vertically. That works the paint into all the small holes and seams in the brick surface rather than bridging over them.
How many coats of limewash do I need?
For a whitewash effect, a single coat of Classico Limewash. For a solid-colored finish it takes two to three coats before it becomes non-transparent and reads as a solid color.
Also in Colleyville